Yellow/Green Stripped Heat Shrink Tubing

Update: 14-10-28 12:40       View:
  • Brand:  
  • unit 
  • Price: 0RMB
  • Promotion:0RMB
Introduction
  Description


Volsun DBRS-125G(2X)(3X)YG is made through co-extrusion of two differentcolored specially formulated masterbatches of polyolefin and irradiationcross-linking process with electronic accelerators .Typical applicationsinclude identification of earth wire or other special cables and wires. 


Features


  • Shrink Ratio:2:1,3:1
  • Highly flame retardant、environment friendly
  • Shrink temperature:70℃~125℃
  • Continuous operating temperature:-55℃~125℃(2:1) -55℃~135℃(3:1)
  • RoHS compliant
  • Standard colors:Yellow/Green Striped
Technical Properties

Properties Typical Data Test Methods/conditions
Tensile Strength ≥10.4MPa ASTM D 2671
Elongation ≥300% ASTM D 2671
Tensile strength after heat ageing ≥7.3MPa 158℃×168h
Elongation after heat ageing ≥100% 158℃×168h
Longitudinal Change -8%~+8% ASTM D 2671
Flammability VW-1 ASTM D 2671 C
 Voltage withstand(rated voltage 600V) 2500V,1min, no break down UL 224
Heat shock No cracks,no dripping UL 224,250℃×4h
Dielectric strength ≥15kv/mm ASTM D 149
Volume resistivity ≥1014Ω.cm IEC 60093
 



Structure


Dimensions 2:1 

Sizes D I.D. As Supplied(mm) After full recovery(mm) Standard package
(m/spool)
       d  I.D.   W Wall thickness
φ1.0/0.70 1.5±0.3 ≤0.70 0.28±0.10 200
φ1.5/0.90 2.0±0.3 ≤0.90 0.30±0.10 200
φ2.0/1.00 2.5±0.3 ≤1.00 0.35±0.10 200
φ2.5/1.30 3.0±0.3 ≤1.30 0.36±0.10 200
φ3.0/1.50 3.5±0.4 ≤1.50 0.38±0.10 200
φ3.5/1.80 4.0±0.4 ≤1.80 0.40±0.10 200
φ4.0/2.00 4.5±0.4 ≤2.00 0.45±0.10 200
φ4.5/2.30 5.0±0.4 ≤2.30 0.45±0.10 100
φ5.0/2.50 5.5±0.4 ≤2.50 0.45±0.10 100
φ6.0/3.00 6.5±0.4 ≤3.00 0.50±0.10 100
φ7.0/3.50 7.5±0.4 ≤3.50 0.50±0.10 100
φ8.0/4.00 8.5±0.5 ≤4.00 0.55±0.10 100
φ9.0/4.50 9.5±0.5 ≤4.50 0.55±0.10 100
φ10/5.00 10.5±0.5 ≤5.00 0.55±0.10 100
φ11/5.50 11.5±0.5 ≤5.50 0.60±0.10 100
φ12/6.00 12.5±0.5 ≤6.00 0.60±0.10 100
φ13/6.50 13.5±0.5 ≤6.50 0.60±0.10 100
φ14/7.00 14.5±0.5 ≤7.00 0.65±0.10 100
φ15/7.50 15.5±0.6 ≤7.50 0.70±0.10 100
φ16/8.00 16.5±0.6 ≤8.00 0.70±0.10 100
φ17/8.50 17.5±0.6 ≤8.50 0.70±0.10 100
φ18/9.00 19.0±0.7 ≤9.00 0.70±0.15 100
φ20/10.0 22.0±0.7 ≤10.0 0.75±0.15 100
φ22/11.0 24.0±0.7 ≤11.0 0.80±0.15 100
φ25/12.5 26.0±0.7 ≤12.5 0.90±0.15 50
φ28/14.0 29.0±0.7 ≤14.0 0.90±0.15 50
φ30/15.0 31.5±0.7 ≤15.0 0.95±0.15 50
φ35/17.5 36.5±0.7 ≤17.5 0.95±0.15 50
φ40/20.0 41.5±0.7 ≤20.0 1.00±0.20 50
Φ45/22.5 46.0±0.7 ≤22.5 1.00±0.20 25
φ50/25.0 51.0±0.7 ≤25.0 1.00±0.20 25
φ60/30.0 ≥60.0 ≤30.0 1.10±0.20 25
φ70/35.0 ≥70.0 ≤35.0 1.20±0.20 25
φ80/40.0 ≥80.0 ≤40.0 1.30±0.20 25
φ90/45.0 ≥90.0 ≤45.0 1.50±0.20 25
φ100/50.0 ≥100.0 ≤50.0 1.65±0.20 25
φ120/60.0 ≥120.0 ≤60.0 1.70±0.20 15
φ150/75.0 ≥150.0 ≤75.0 1.70±0.20 15
φ180/90.0 ≥180.0 ≤90.0 1.75±0.20 15
 
Dimensions 3:1     
                         
     Sizes D I.D. As Supplied(mm) After full recovery(mm) Standard package
(m/spool)
d I.D. w Wall thickness
φ1.5 ≥1.6 ≤0.50 ≥0.50 200
φ2.4 ≥2.4 ≤0.80 ≥0.50 200
φ3.0 ≥3.2 ≤1.00 ≥0.55 200
φ4.5 ≥4.8 ≤1.50 ≥0.60 100
φ6.0 ≥6.4 ≤2.00 ≥0.65 100
φ9.0 ≥9.5 ≤3.00 ≥0.75 100
φ12.0 ≥12.7 ≤4.00 ≥0.75 50
φ18.0 ≥19.1 ≤6.00 ≥0.85 50
φ24.0 ≥25.4 ≤8.00 ≥1.00 50
φ39.0 ≥39.0 ≤13.0 ≥1.15 50
 
Note: Non-standard dimensions and packages are available on request
More Products