Low Temperature Thick Adhesive-lined Dual Wall Heat Shrink T

Update: 14-10-31 15:58       View:
  • Brand:  
  • unit 
  • Price: 0RMB
  • Promotion:0RMB
Introduction
  Description

SBRS-125G(3X)isacross-linked polyolefin tube that is extruded with an inner layer of adhesive.The inner layer of adhesive, with superior sealing capability, is also a bufferagainst mechanical strain. Dual wall heat shrink tubing is designed to providesuperior sealing against water, corrosive gas and chemicals. Typicalapplications include environmental sealing of in-line splices, sealing andstrain relief of connectors and terminals, abrasion protection and electricalinsulation of automotive wiring harness splices and valuable components, fleet& marine sealing & protection and wire bundling etc. 

Features
  • Shrink ratio:3:1
  • Flexible, flame retardant outer layer,environmentally friendly,low temperature shrinkable,UV resistant
  • Shrink temperature:60℃~105℃
  • Continuous operating temperature:-45℃~125℃
  • RoHS compliant
  • Standard colors: black,other colors are available on request

    Technical Performance
                                  
    Property Typical data Test method/condition
    Tensile strength ≥10.4MPa ASTM D 2671
    Elongation at break ≥300% ASTM D 2671
    Tensile strength after heat aging ≥7.3MPa 175℃×168h
    Elongation after heat aging ≥100% 175℃×168h
    Longitudinal change -8%~+8% ASTM D 2671
    Flammability Self extinguishing in 30 sec. AMS-DTL-23053/4
    Voltage withstand(Rated voltage 600V) 2500V,1min no breakdown UL 224
    Heat Shock No cracks,no dripping UL 224, 250℃×4h
    Dielectric strength ≥15kv/mm IEC 60243
    Volume resistivity ≥1014Ω.cm IEC 60093
 



Technical Performance                                              
 
Property Typical data Test method/condition
Softening point 95±5℃ ASTM E 28
Water absorption <0.5% ASTM D 570
Peel strength(PE) ≥120N/25mm ASTM D 1000
Peel strength(AI) ≥80N/25mm ASTM D 1000
 
 
Structure                                  






SBRS-125G(3X)LS Dimensions                           

Dimensions  As supplied ID(mm) After full recovery(mm) Standard package
mm inch ID Wall thickness Thickness of adhesive
 
(m/spool,    m/pc)
Φ3.2 1/8 ≥3.2 ≤1.00 0.90±0.15 0.45±0.10 200
Φ4.8 3/16 ≥4.8 ≤1.60 1.20±0.15 0.55±0.10 100
Φ6.4 1/4 ≥6.4 ≤2.20 1.25±0.15 0.55±0.10 100
Φ7.9 5/16 ≥7.9 ≤2.70 1.35±0.15 0.65±0.10 100
Φ9.5 3/8 ≥9.5 ≤3.20 1.35±0.15 0.65±0.10 50
Φ12.7 1/2 ≥12.7 ≤4.20 1.55±0.15 0.75±0.10 25
Φ15.0 5/8 ≥15.0 ≤5.20 1.65±0.15 0.75±0.10 25
Φ19.1 3/4 ≥19.1 ≤6.30 1.90±0.20 0.85±0.10 25
Φ25.4 1 ≥25.4 ≤8.50 2.00±0.20 0.90±0.10 25
Φ30.0 1-1/4 ≥30.0 ≤10.20 2.05±0.20 0.90±0.10 1.22
Φ39.0 1-1/2 ≥39.0 ≤13.50 2.35±0.20 1.05±0.10 1.22
 
 NoteNon-standard dimensions and package are available on request
More Products